# Enabling the 2D Barcode Separator Setting

> Source: https://help.getedara.com/en/articles/16258908-enabling-the-2d-barcode-separator-setting · Category: Settings › General · Last updated: 2026-08-07 · العربية: https://help.getedara.com/ar/articles/16258908-%D8%AA%D9%81%D8%B9%D9%8A%D9%84-%D8%A5%D8%B9%D8%AF%D8%A7%D8%AF-%D9%81%D8%A7%D8%B5%D9%84-%D8%A7%D9%84%D8%A8%D8%A7%D8%B1%D9%83%D9%88%D8%AF-%D8%AB%D9%86%D8%A7%D8%A6%D9%8A-%D8%A7%D9%84%D8%A3%D8%A8%D8%B9%D8%A7%D8%AF

If you want to enter multiple serial numbers at once, each on a separate line, you can specify the separator between them so the system automatically splits each serial number into its own line during entry.

## Enabling the 2D Barcode Separator Setting

1. Go to "Settings".
2. Open the "Modules Settings" page.
3. Go to the "Global" tab.
4. Enable the "Apply 2D bar code mode" setting.
5. Select the 2D bar code separator (Space - , - | - /).
6. Click on " **Save** ".

![Enabling the 2D Barcode Separator Setting — Click on "Save".](https://help.getedara.com/images/general-settings/16258908/01.en.gif)